How to Make Cabling Straight and Cross

Create reports of cable manufacture and testing of cables using a cable tester:

Prepare tools for crimping like:

● Tank Crimping

Tank Crimping is a tool to cut UTP cable and connector to clamp the end, and this is very important for us who want to learn how to mengkrimping cable, this tool looks almost the same as regular tank that we see or meet.

● UTP Cables

UTP cable should we use for each channel internet network, and in this UTP cable inside the cable there are 8 small pieces of colorful, and the colors of the small wires inside the UTP cable.

● RJ-45

RJ-45 is a peripheral that we put at the end of the UTP cable to my goal that we put on LAN.Kita port must have an RJ-45 for the pair at the end of the UTP cable.

● Cable Tester

Cable Tester is a tool to test the results krimpingan us, but if we are wrong then krimpingan Cable Tester lights will not turn on and if the results are correct then we krimpingan in Cable Tester lights will turn on automatically, so unbelievably useful tool for us to know krimpingan our results.

Here is a sequence of cabling Straight:

Edge A

1. White Orange

2. Orange

3. White Green

4. Blue

5. White Blue

6. Green

7. White Chocolate

8. Brown

 Edge B

1. White Orange

2. Orange

3. White Green

4. Blue

5. White Blue

6. Green

7. White Chocolate

8. Brown

Here is a sequence of cabling Cross:

Edge A

1. White Orange

2. Orange

3. White Green

4. Blue

5. White Blue

6. Green

7. White Chocolate

8. Brown

Edge B

1. White Green

2. Green

3. White Orange

4. Blue

5. White Blue

6. Orange

7. White Chocolate

8. Brown

Cable straight

Is a cable that has the same mounting method between the end of one to the other end. Straight is used to connect two different devices. The sequence of straight cable standards are as follows according to the standard TIA / EIA 368B (the most widely used) or is sometimes also used standard TIA / EIA 368A as follows:

Examples of the use of a straight cable is as follows:

● Connect the computer to the switch

● Connect the computer to the LAN on cable modem / DSL

● Connect to the router with a LAN cable modem / DSL

● Connecting switch to router

● Connect the hub to the router

Cable cross over

Crossover cable is a cable that has a different arrangement between the end of the toe or two. Crossover cable is used to connect two devices together. The figure below adalahsusunan standard crossover cable.

Examples of the use crossover cables are as follows:

● Connect 2 computers directly

● Connect 2 pieces switch

● Connect 2 pieces hub

● Connect the switch to hubs

● Connect the computer to the router

8 pieces of existing wires in UTP cable (either on a straight or cross-over cable) only 4 pieces are used to send and receive data, which is wired to the pin No. 1,2,3 and 6